Hotline：
13962694808 15151626266◆ when all materials are evenly mixed by gravity metering, the micro metering can be strictly controlled with an accuracy of + 0.1%;
◆ automatic repeated calibration function, which will automatically calibrate the program after each weighing to ensure the best batching accuracy;
◆ it has the function of formula storage, which can store up to 100 groups of formulas;
◆ alarm history recording function;
◆ sgb-600 and below series are machine mounted as standard; Sgb-1200 and above The upper series is equipped with tripod mounting type as standard (equipped with tripod, storage bucket and pneumatic discharge valve);
◆ each model is equipped with a set of secondary blanking valve as standard, which is used to measure the component ratio between 0.5% and 5%;
◆ it has Ethernet communication function to realize networking and centralized control function with molding machine;
◆ with automatic material suction control function;
Optional devices:
◆ optional material level gauge at the bottom of the batching hopper is convenient to alarm in advance when the raw material is short of material;
◆ when the machine is used for ground installation, it needs to be equipped with tripod, pneumatic discharge valve, storage bucket and suction bucket (suitable for sgb-600 and below)
◆ optional vacuum generator SVG and Europeanized central vacuum hopper shr-u-st;
◆ sgb-40 / 200 / 600 can be equipped with micro metering valve to calculate the proportion of materials from 0.2% to 0.5%:
◆ special material metering valve can be selected to calculate flakes or irregular crushed materials within 12 * 12 * 12mm;
◆ optional data acquisition function, which can read the actual proportion, output and accumulation of each batch of raw materials, recycled materials, color masterbatch and additives
Dosage and production rate;
◆ optional automatic compensation function for recycled materials (low material switch shall be selected for the recycling hopper), which can calculate the color difference compensation according to the amount of recycled materials;
◆ optional coating treatment on the inner surface of the mixing drum to avoid the influence of raw materials on the batching accuracy due to static electricity;
Note: (1) the above data are obtained from the continuous rotation test of uniform granular raw materials with bulk density of 0.8kg/l and diameter of 3-4mm. The values will change according to the characteristics of raw materials. If uncertain materials are used, please discuss separately;
(2) the metering valve is applicable to the proportion of 5% and above, and is applicable to uniform particle raw materials or uniform particle recycled materials with a size of less than 6 * 6 * 6mm
(3) the secondary metering valve is applicable to uniform particle color masterbatch or additives with a proportion of less than 0.5% - 5% and a size of less than 4 * 4 * 4
(4) it can be fitted with micro metering valve, suitable for 0.2% - 0.5% The proportion of 5% is applicable to uniform particle color masterbatch or additive with size within 4 * 4 * 4mm
(5) it can be fitted with special material metering valve, which is suitable for flakes or irregular crushers with size less than 12 * 12 * 12mm
(6) mixing ratio error refers to the difference between the set percentage of each component and the actual, and the micro metering accuracy can be controlled at + 0.1%
(7) a set of primary metering valves is attached to replace the formula. When necessary, the mixing motor is used to explore the three-phase power supply
