The color master machine manufacturer analyzes the electrical control system of the color master machine for you

238

Weighing Color Masterbatch machine system is an electric drive control system with motor as the driving equipment of mechanical motion as the control object. The manufacturer of Color Masterbatch machine takes the controller as the center and the power electronic power converter as the actuator. This system controls the torque, speed and angle of the motor, converts the electric energy into mechanical energy, and realizes the motion requirements of the moving machinery.
As the actuator of weighing color master machine, color mixing master machine system integrates power electronic devices, control, drive and maintenance. With the progress of digital pulse width modulation technology, special motor material technology, microelectronics technology and modern control technology, it has experienced many development processes. Once the color mixing host is started, the external safety wire of the drive will be burned and the device will not work. Color masterbatch manufacturer
During the inspection, the color machine manufacturer found that a power tube had been damaged, but because there was no material, he didn't know the effect of the tube. That is, the power supply was driven forward, and a power tube was installed. After power on, the safety burned again and the tube was broken.
According to the preliminary analysis of the maintenance engineer, it is correct, that is, the safety repeated fuse must be abnormal high current drive. Check the power tube for damage. However, the role of tube is not clear. In fact, the tube is the power driving tube of the stepping motor, and the stepping motor is started under high voltage, so it must bear high voltage and high current. Statically, the pulse circuit distributor is in the line, and its power supply has low resistance to ground, but there is no short circuit.
Color Masterbatch equipment
According to the analysis of the number of components in the line and their power consumption, the resistance value of the power supply to the ground should not be so small, so it is suspected that the components in the line are damaged.
The weight color masterbatch controller is suitable for injection molding, extrusion or blow molding production, and is suitable for the active sharing and mixing of new materials, secondary materials, color masterbatch or additives. The color masterbatch machine controller can be applied to various servo motors or precision stepping motors. With the special microcomputer controller, the addition ratio of color masterbatch and additives can be measured. The natural color master controller can be connected with the signals of various molding machines to work synchronously to ensure the consistency of the performance of molded products.

Last
Nothing